ADD: No.9 Songhuajiang Rd, Yantai ETDZ, P.R.ChinaP.C.：264006
TEL：0086-535-6398693 / 6398691
FAX：0086-535-6398690 / 6085834
EMAIL: info@powderdevice.com
SERVICR
PRODUCTS
ABOUT US
CONTACT US
鲁公网安备 37069302000792号PRODUCTS
Micron Mill
Micro grinding system ACM operates upon the principle of impact causing the high speed rotating plate rotor with crush pins.The grain size of material is to be micronized by the impact of raw material on the rotating crush pins(2)and fixed liner(3) as well as the impact of material particles against each other.The particles with certain size will be spurted into classifying zone(6) under the coeffect of attraction force(F1)by the fan and the cenerifugal force(F2) by the classifier(5) .The fine particles near the center of classifier will be out going to the product output pipe if F1≥F2,The coarse particles in classifier will be sent into the grinding zone causing the centrifugal force F2 of themselves and to be grinded again.
|
|
 1、under cover of grinder 2、plate-rotor with crush pins 3、liner 4、shroud ring 5、classifier 8、classifying zone 10、grinding zoneParticle Size Distribution |
Low Noise ACM system: ACM(LN) Parameters：
|
Model |
ACM-05 |
ACM-10 |
ACM-15 |
ACM-30 |
ACM-40 |
|
Output kg/h |
50-75 |
150-200 |
250-350 |
450-600 |
600-850 |
|
Rotor Motor kw |
4 |
11 |
11 |
22 |
30 |
|
Rotor Speed rpm |
12000 |
7000 |
7000 |
4800 |
4600 |
|
Classifier Motor kw |
0.75 |
1.5 |
1.5 |
4 |
7.5 |
|
Classifier Speed rpm |
1200-4500 |
1000-3000 |
1000-3000 |
700-3000 |
700-3000 |
|
Fan Motor kw |
4 |
11 |
11 |
22 |
45 |
|
Air Intake m3/h |
800 |
1500 |
2000 |
3500 |
4200 |
|
Dimension m×m×m |
2.1×1.7×2.8 |
6.5×1.7×4.0 |
6.5×1.9×4.3 |
7.8×2.2×4.4 |
9.0×3.0×4.5 |